Belshaw Adamatic TG50 Thermoglaze - Manual (Page 39)

Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425
Thermoglaze MN-1720WM 33
11. Remove the safety cover.
WARNING
Failure to wash the conveyor chain daily may cause damage to the conveyor drive motor. The
Thermoglaze will shut down if the chain becomes stiff from glaze buildup. After cleaning, the motor
reset button may need to be pressed, located under the control panel. NOTE – THE SERVICE CALL
TO FIX THIS PROBLEM WILL NOT BE COVERED UNDER WARRANTY.