Belshaw Adamatic TG50 Thermoglaze - Manual (Page 29)

Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425
Thermoglaze MN-1720WM 23
Maintenance 6
The ThermoGlaze is engineered to need little
maintenance. By keeping the system clean, the
equipment will last for years. The only
maintenance that is required is the following:
When cleaning the donut system, check all
rubber gaskets for wear and replace when
necessary. Check for wear on impellers of the
glaze pump, replace when necessary. .
DO NOT spray machine with water or cleaning
agents to clean. Only wipe main unit off with
damp cloth.
WARNING
HAZARDOUS VOLTAGE
Contact with electricity in the control box can
cause shocks, burns or death. Always
disconnect the control box from power source
before maintenance.
WARNING
Contact with electricity in the main cable can
cause shocks, burns or death. Always
disconnect the main electrical cable from the
power source before maintenance.
WARNING
Electrical fires can cause serious shock,
injury, burns or death. Always disconnect the
machine from power source before
maintenance.