Belshaw Adamatic Harmony Deck Oven User Manual

Page 24

Advertising
background image

FG257 MODULAR DECK 02/07 RAC

23

10. TEMPERATURE

Press to set the bake temperature required. Use up and down keys (12) to
adjust the value.
Press button again to save or wait 10 seconds to auto-save.

11. PROGRAM

Use up and down keys (12) to go to required program.

Press “p” for 5 seconds and all displays will flash.(A beep confirms settings
are now saved)

12. UP/DOWN

BUTTONS

Used to adjust values when required.

13.

AUTO ON SET / ADD TIME

IF 7 DAY TIMER ENABLED

Used to access auto switch on times.

IF 7 DAY TIMER DISABLED

During bake cycle, Used to add extra bake time (1 minute each press).
At end of bake, press for two minutes and then once for each extra

minute required.


14.

“i BUTTON” CONNECTION

Used with special “iButton” storage device to change firmware of control
board.

NOTE

Whenever power is connected to the board, 8 minutes

must elapse before the oven will steam.

This allows the bottom elements to heat enough for steaming.

This will always happen if the power is disconnected and connected again,

even if the oven is hot.

“I Button” storage device

2”

Advertising