Belshaw Adamatic Harmony Deck Oven - Manual (Page 25)

1. With oven in standby mode (power on) press “on” button (1).
2. Press program button (11)
Using up and down keys (12) choose the set program required.
Oven will heat to the temperature required. Oven is ready for use when the display
shows the temperature of the program chosen and if steam is required the display
stops flashing.
Note:
If the oven is already hot and the set temperature is lower than the current temperature of
the oven, the door should be opened to allow the temperature to drop.
3. Load oven as required.
To preserve heat, do not leave doors open more than needed to load oven.
4. Press start (3)
Press (13) at anytime during the bake to add 1 minute to the bake time.
5. 2 minutes from the end of the bake the buzzer will sound for 10 seconds.
Press start (3) to silence if required.
6. At the end of the bake the buzzer will sound again. Press stop (2).
FG257 MODULAR DECK 02/07 RAC
24
OPERATION
13
1
3
2
12
ON/OFF
BAKE TIME
UP/DOWN
BUTTONS
START
STOP
6 DAMPER
11 PROGRAM
DAMPER (6) Press to open damper. Press again to close damper
Red light shows when in open position.
(Closes if left open for 90 minutes)