Beurer WL 80 - Manual (Page 13)

13
4. The minute display of the alarm flashes in the display.
Use the / buttons to set the minute and confirm
using the Menu/Set button.
5. END is briefly shown in the display. The set alarm is
now activated and appears in the display.
8.1.2 Setting an alarm for each day ( DAY)
For each alarm that has been set, you can use the DAY
function to specify the days of the week on which the
alarm should sound.
1. When the device is switched on, keep pressing the
ALARM button until the desired alarm memory space
appears in the display ( A1, A2 or A3).
2. Press the / buttons until DAY is shown in the
display.
3. Press the Menu/Set button. MON (Monday) and off
appear in the display.
4. Use the / buttons to activate ( on) or deactivate
( off) the alarm for Monday. Confirm using the
Menu/Set button.
5. TUE (Tuesday) appears in the display. Make the settings
for the other days of the week in the same way as for
Monday, as described in the previous point. Then set
the alarm time as described in section 8.1.1.
8.1.3 Permanently deactivating the alarm ( OFF)
To permanently deactivate a set alarm, proceed as
follows:
1. When the device is switched on, keep pressing the
ALARM button until the desired alarm memory space
appears in the display ( A1, A2 or A3).
2. Press the / buttons until OFF appears in the display.
3. Confirm using the Menu/Set button.
4.
END appears in the display. The alarm is now
permanently deactivated.
8.2 Switching off the alarm
8.2.1 Switching off the alarm during sunrise:
When the sunrise function is switched on, the device
slowly begins to light up prior to the set alarm time and
" SUNRISE" is shown in the display. You can switch off
this sunrise by pressing any button. However, the alarm
tone will still sound at the set alarm time.
8.2.2 Snooze mode (Snooze) for the alarm
The device features a snooze mode (Snooze).
If the alarm sounds and you press the Snooze function
(by tapping the light area), the alarm will sound again once
the set snooze duration has elapsed (see section 7.4).
8.2.3 Switching off the alarm when the alarm tone sounds
When the alarm sounds, press any button apart from
Snooze. The alarm is now switched off and will only
sound again at the set alarm time.
8.3 AuX mode
You can connect an external audio source (e.g. MP3
player, smartphone or CD player) to the wake-up light
via the AUX input.
1. Connect the supplied AUX cable to an audio source.
2. Insert the other end of the AUX cable into the AUX input
on the rear of the device.
3. Press the AuX button on the device. The external audio
source is now connected to the wake-up light.
4. Use the +/- buttons on the side to adjust the volume.
5. Press the
■ button to exit AUX mode again.
6. Disconnect the AUX cable after use.
8.4 uSB mode
You have the option of connecting a USB stick (up to
32 GB) to the wake-up light via the USB connection,
enabling you to listen to music. The device can play the
following file formats: MP3, WMA and WAV.
Note
The device can only play music files that are stored
in the root directory. Music files that are stored in sub-
directories cannot be played.
If you wish to use USB mode, proceed as follows:
1. Insert the USB stick into the USB connection on the
wake-up light (located on the rear of the device).
2. If the USB stick is already inserted: when the device
is switched on, press the uSB button.
"USB", the current song number and the song length
appear in the display.
3. To switch to the next song, press the button. To switch
to the previous song, press the button. To pause
playback, press the ►ǁ button. To switch between
"Standard playback", "Repeat" (P) and "Repeat all
songs" ( P
ALL
), press the Menu/Set button.
4. Use the +/- buttons on the side to adjust the volume.
5. To end USB mode, press the
■ button.
8.5 Radio mode
You can also use the device to listen to the radio.
If you wish to use radio mode, proceed as follows:
1. When the device is switched on, press the FM button.
The current station frequency and programme number
(e.g. P1) appear in the display.