BUG-O Systems CWP-11 - Manual (Page 13)

13
PENDANT CONTROL (BUG-6050)
This is the pendant control with keypad and display. The pendant control is used for
programming the sizes of the work pieces and their fit, as described on the next page. It plugs
into the Pendant Control Connection on the CBP-1500 rotation control box.
ALPHA KEYS: Press Keys A, B, C, D, or E for the function desired, as described in the
programming section of this manual.
DIGIT KEYS: Use the digit keys to enter pipe diameters or dimensions.
ENTER: Push the enter button to store the numeric value keyed.
BACKSPACE: The backspace key removes the last digit keyed in before pushing the enter
button, if a correction is required.
SHIFT: The blank key in the top right corner of the key pad is the SHIFT key. Use this key to
access additional programming options.