BUG-O Systems UNI-BUG III - Manual (Page 31)

31
UNI-2020 “L” BASE ASSEMBLY / PARTS LIST
ITEM QTY PART NO. DESCRIPTION
1 2 BER-1001 Flg Brg .502 x .627 x .375 x .750 x .094
2 2 BER-1002 Thrust Washer .627 x 1.004 x .063
3 1 BUG-1550 Gear Motor (150:1)
4 2 BUG-1858 Soc Hd Shr Scr 5/16 x 1-1/4 x 1/4-20
5 2 BUG-1859 Bearing Spacer
6 1 BUG-1863-R Idler Channel
7 2 BUG-1888 Drive Roll
8 2 BUG-1893 Retaining Ring 1/2" External
9 2 BUG-1895 Roller Bearing Assembly
10 2 BUG-1897 Sleeve
11 2 BUG-1898 Axle
12 4 BUG-1899 Washer 1-1/6" O.D. x 1/2" I.D. x 1/32"
13 2 BUG-1988 Belleville Washer .323 I.D. x .709 O.D.
14 4 BUG-2012 Bearing
15 4 BUG-5121 Stand Off
16 4 CON-1029 Washer 5/16" x .015"
17 4 FAS-0525 Soc Hd Cap Scr 8-32 x 1/2"
18 2 FAS-2559 Soc Hd Cap Scr 1/4-20 x 3"
19 1 FAS-1445 Phil Pan Hd Scr 10-32 x 1/2"
20 4 FAS-2824 Flt Hd Slt Scr 8-32 x 1-3/4"
21 1 UNI-1021 Base Plate
22 2 UNI-1024 Slave Pinion
23 1 UNI-1025 Pinion / Sleeve Assembly
24 1 UNI-1034 Uni-Bug Drive Wheel Spacer
25 1 UNI-1040 Drive Wheel Blk Assembly
26 2 UNI-1062 Shaft Spacer 1-3/8" LG.
27 2 UNI-1063 Slave Shaft 4" LG.
28 1 UNI-1320 Angle Adaptor Kit
29 1 WAS-0230 #10 Washer
30 2 WAS-0240 1/4" SAE Washer
31 1 UNI-1332 Rail Guide
32 4 MET-0552-SS Soc Hd Scr M2 x 8