BUG-O Systems Stiffener Welder - Manual (Page 2)

SAFETY
PROTECT YOURSELF AND OTHERS FROM SERIOUS INJURY OR
DEATH. KEEP CHILDREN AWAY. BE SURE THAT ALL INSTALLATION,
OPERATION, MAINTENANCE AND REPAIR PROCEDURES ARE
PERFORMED ONLY BY QUALIFIED INDIVIDUALS.
1. Do not plug in the power cord without
first verifying the equipment is OFF and
the cord input voltage is the same as
required by the machine or serious
damage may result.
2. Do not leave the equipment unattended.
Remove from the worksite and store in a
safe location when not in use.
Read the instruction manual before
installing and using the equipment.
1. The equipment is not waterproof. Using
the unit in a wet environment may
result in serious injury. Do not touch the
equipment when wet or standing in a
wet location.
2. Never open the equipment without first
unplugging the power cord or serious
injury may result.
3. Verify the customer-supplied power
connections are made in accordance with
all applicable local and national electrical
safety codes. If none exist, use
International Electric Code (IEC) 950.
4. Never remove or bypass the equipment
power cord ground. Verity the
equipment is grounded in accordance
with all applicable local and national
electrical safety codes. If none exist,
use International Electrical Code (IEC)
950.
ELECTRIC SHOCK can kill.
READ INSTRUCTIONS
EQUIPMENT DAMAGE
POSSIBLE.
1. Never try to stop the pinion from moving
except by removing power or by using
the STOP control.
2. Do not remove any protective panels,
covers or guards and operate equipment.
FALLING EQUIPMENT
can cause serious personal
injury and equipment
damage.
Faulty or careless user installation is
possible. As a result, never stand or
walk underneath equipment.
MOVING PARTS can cause
serious injury.
CAUTION
DO NOT LEAVE EQUIPMENT UNATTENDED
WHEN NOT IN USE!
Remove from work site and store in a safe location.