BUG-O Systems Stiffener Welder - Manual (Page 5)

5
The Stiffener Welder has two spring loaded corner followers which keep
the welding guns aligned while the unit is running. The spring loaded Slide
Assembly (B) holds the Wheel Assembly (A) in the workpiece corner and
enables the wheel to ride over tack welds. The Mounting Arm Pivot (C)
enables the wheel and gun to maintain a constant work angle. The entire
corner follower can be adjusted up and down using an Adjustment Knob and
Clamp (D). Once the corner follower’s height is set, the gun can be adjusted
Left/Right (E) and Up/Down (F) using the appropriate knobs.
HEAVY DUTY CORNER FOLLOWER
MOUNTING ARM
SLIDE ASSEMBLY (B)
GUN LEFT/RIGHT
ADJUSTMENT (F)
GUN UP/DOWN
ADJUSTMENT (F)
MOUNTING ARM
PIVOT (C) [HIDDEN]
GUN HOLDER
WHEEL ASSEMBLY (A)
WHEEL MOVEMENT DUE TO
SPRING LOADED SLIDE AS-
SEMBLY (B)
WHEEL MOVEMENT DUE TO
MOUNTING ARM PIVOT (C)
CORNER FOLLOWER
UP/DOWN ADJUSTMENT
AND CLAMP (D).
[PARTIALLY HIDDEN]