2 ac power requirements, 3 main and extension frame power connections, 3 main and extension frame power – Cadac C-Type User Manual
Page 9: Connections
Advertising
Connecting the mixer systems
1-3
Revision C2005-2
C-Type
41615
$&#SRZHU#UHTXLUHPHQWV
CADAC power supply units are designed to run from a minimum of 208V, 50/60Hz
a.c. In many parts of the world where the single phase a.c. supply is 110/120V, the
CADAC power supplies are adjusted to operate at this input voltage.
41616
0DLQ#DQG#H[WHQVLRQ#IUDPH#SRZHU#FRQQHFWLRQV
See fig 1-3 below for schematics of the frames power connections.
1.
Connect a PSU cable between the PSU 1 and the PSU connector on the MAIN
FRAME.
2.
Connect a PSU cable between the PSU 2 and the PSU 2 connector on the MAIN
FRAME.
3.
Repeat procedures 1 and 2 for EXTENSION FRAME 2 (a 3 frame console).
FIG 1-3. Power connections
368#4
368#5
Advertising