Campomatic CT1190 - Manual (Page 10)

9
 If select MELODY,
1) Press key to confirm.
2) Press ▲ or ▼ key to select desired melody, the corresponding melody sound can be
heard with the selection.
3) Press key to confirm your selection.
 If select VOLUME,
1) Press key to confirm.
2) Press ▲ or ▼ key to select desired ringer volume 1- 5, the corresponding volume sound
can be heard. if you want to switch off select OFF.
3) Press key to confirm your selection.
NOTE：1) If you select ring OFF for INT RING, there will be no icon display on LCD ,but when page or
transfer call to this unit ,it will not ring;
2) If you select ring OFF for EXT RING, there will be a ringing off icon display on LCD
and when there is an incoming call, the unit will not ring.
 TONE SETUP
The user is able to change the handset tone settings.
1) Press key, then using ▲ or ▼ key to select TONE SETUP item.
2) Press key to enter.
3) Press ▲ or ▼ key to select the KEY TONE and BATTERY LOW, RANGE ALARM setup.
4) Press key to confirm.
5) Press ▲ or ▼ key to select the ON or OFF to enable/disable the sounding of a beep respectively.
6) Press key to confirm your selection.
NOTE: after this setting,
 a beep for key tone will sound when a key is pressed on the handset.
 a beep for battery low then the battery is low.
 a beep for range alarm will sound when the handset is out of ringed of the base
 LANGUAGE
The handset will support up to 16 pre-defined languages.
1) Press key, then using
▲ or ▼ key to select LANGUAGE item.
2) Press key to enter. First display is ENGLISH.
3) Press ▲ or ▼ key to select the language. Each language will display in its own native translation.
4) Press key to confirm your selection.
 HANDSET NAME
The operation will allow the user to change the handset name
1) Press key. Using ▲ or ▼ key to select “HS NAME”,
2) Press key, when the function is selected, the screen will display the current handset label.
3) Enter the handset label, input the handset name.
4) If you make a mistake, press R/CLR key to correct.