Campomatic CT1190 - Manual (Page 11)

10
5) Press key to confirm.
 AUTO ANSWER
The Handset can be set to answer an incoming call automatically when it is on the cradle. The user is
able to select to enable/disable this auto answer feature.
1) Press key. Using ▲ or ▼ key to select AUTO ANSWER,
2) Press key to enter.
3) Press ▲ or ▼ key to select On or OFF
4) Press key to confirm your selection. Exit from this sub-menu will return the user to the AUTO
ANSWER
 BARRING
The Handset can be set to disable all external outgoing calls or special outgoing call. The user is able to
select to enable/disable this feature. Note that internal calls to intercom or conference will still be
available.
1) Press key. Using
▲ or ▼ key to select BARRING,
2) Press key the user will be prompted to enter the PIN code, input 4-digit code (defaulted as 0000).
3) Press key to confirm, then using
▲ or ▼ key to select ON or OFF, press
key to confirm.
4) If select ON, the display shows NUMBER 1, press ▲ or ▼ to choose NUMBER i(i=1~4).
5) Then press to confirm, using the numerical key to input number(maximum 4 digits) you want to
barring.
6) Press to confirm. Repeat the above steps to set the rest of 3 groups.
After setting up the barring numbers, once you dial a number begin with anyone of them, LCD will display
CALLS BARRED and the number is not allowed to be dialed out.
 DATE & TIME
The user is able to set the date and time on the handset, by selecting the following option.
Press key to enter date and time settings.
1) Press key. Using ▲ or ▼ key to select DATE&TIME,
2) Press key and the last two digits of the year flashes.
3) Edit the year, month, time and date by pressing
▲ or ▼ key.
4) Press key to confirm the setting, and return to the
“DATE & TIME” menu.
NOTE: The date and time will be automatically set when the first caller ID message is received.
 SELECT BASE
This function allows the user to register the handset to existing base(with other handset registration)
1) Press key, then using ▲ or ▼ key to choose SELECT BASE.
2) Press key and the LCD displays BASE 1 + .
3) Press ▲ or ▼to select base(BASE 1~4) or AUTO.
4) Press to begin searching, if you hear a sound of “di-du”, means register successful.
 HANDSET DEFAULT :
This function allows the user to restore the handset setting to the factory default.