Caple TDF200 - Manual (Page 13)

• CLEANING THE APPLIANCE
25 24
EN EN 6 / REGULAR MAINTENANCE
Fig. 31
• CHANGING THE BULB
You can replace the light bulb (type E14-
15W/230V) yourself
(Fig. 31).
Important :
Unplug the power cord before chan-
ging the bulb.
To do this :
— Unscrew the glass cover located to the left
inside the appliance.
— Unscrew the extinguished bulb and replace it.
— Screw on the glass cover tightly.
Important :
The bulb must be replaced when the
appliance is cooled down.
6 / REGULAR MAINTENANCE
Fig. 27
Fig. 28
Fig. 29
Fig. 30
Important :
The condenser must be cleaned twice
a month.
Important :
Unplug the power cable from the
socket before cleaning the condenser.
— Open the grill at the front of the appliance.
— Release the condenser
(Fig. 27).
— Remove it carefully (Fig. 28).
— Remove any lint from the condenser.
— Clean it with water only under the tap
(Fig.
29).
— After cleaning, ensure that none of the tubes
are “blocked” and that the fins are clean.
— Rub it superficially.
— Re-insert the condenser and lock it in place.
Close the grill.
Important :
When refitting the condenser, ensure
that it is pushed in firmly right to the back of
its housing when locking it in.
• CLEANING THE CONDENSER
Advice :
To clean the control panel, the access
to the drum and the casing, use only a
sponge or a damp cloth and some soapy
water.
— Ensure that there is no fluff accumulating
round the dryer.
— Clean the door seal with a damp cloth.
— Clean the filter housing with your vacuum
cleaner once a year.
You should n no ott u us se e,, under any circumstances
(Fig. 30) :
— Abrasive powders
— Metal or plastic sponges
— Alcohol-based products (alcohol, thinners,
etc.)