Cata ME 605 TC User Manual

Page 36

Advertising
background image

Description of the buttons:

Reduce Minutes

Timer function selector

Increase Minutes

Warning alarm

An independent audible signal that can be set to a maximum time of

23 hours and 59 minutes. To set the time, press once. The alarm

indicator will flash for 5 seconds, during which time we can select

the required time by pressing and . The countdown will start

immediately. At the end of the time, the indicator will flash and an

intermittent sound signal will be triggered, which can be interrupted

by pressing the button. If it is not stopped, it will do so automatically

after 2 minutes. The warning alarm does not control any of the oven

functions.

Semi-automatic cooking

A. Cooking time setting

By pressing twice, set the cooking time using and

. The cooking will start immediately and appear on the

indicator. At the end of the set time, the cooking will be

interrupted and the intermittent sound signal will be heard.

Cancel it as indicated above.

Note that the oven will continue to work after the end of the

cooking process and when the alarm has been stopped. It must

be turned off manually.

B. Setting the cooking end time

By pressing three times, set the chosen cooking end time

using and . The cooking will start immediately and appear

on the

indicator. When the cooking time ends, the cooking

will stop and the intermittent sound signal will be heard. Cancel

it as indicated above.

The programming status can be seen at any time by pressing

. The programming can also be cancelled at any time by

pressing and resetting the display. Pressing after this will

prepare the oven for manual operation.

Note that the oven will continue to work after the end of the

cooking process and when the alarm has been stopped. It must

be turned off manually.

Automatic cooking.

+

(Start and end of cooking)

1) Programme the cooking time by pressing twice and

selecting the required time with and .

2) Set the end of the cooking time by pressing 3 times and

selecting the required time with and .

3) Select the required temperature and function using the

thermostat controls and selector.

After these operations, the

and

indicators will continue

to be shown on the display, showing that the oven has been

programmed.

Practical example:

We want to cook for 45 minutes and for the cooking to end at

2 p.m.

• We press twice and select 0.45 by using and .

• We press three times and select 14.00 with and .

• After these operations, the current time will reappear on the

display and the

and

indicators will show that our

programming has been understood and memorised.

• At 1.15 p.m. (2 p.m. less 45 minutes), the oven will start

automatically.

• At 2 p.m. the cooking will stop automatically and the

intermittent sound signal will be heard.

• We can switch it off by pressing any button.

Note that the oven will continue to work after the end of the

cooking process and when the alarm has been stopped. It must

be turned off manually.

Setting the clock

When turning on the oven (and also after any possible power

cut) the numbers 12.00 will appear in the panel and the

indicator will flash until we enter the right time.

To set the right time, press or to adjust. There is a

5-second lapse for acceptance during which no button must be

touched. The rate of change will increase considerably a few

seconds after the buttons have been depressed.

To change the clock time, we can press 4 times until the

indicator flashes and set the correct time with and .

NB

WARNING! any power cut cancels the programmed functions,

including the clock. When the power supply returns, the

indicator will flash and can be reprogrammed

CLEANING THE APPLIANCE

IMPORTANT

As a safety precaution, before beginning to clean the oven al-

ways unplug it from the power supply or remove the appliance

power lead.

Cleaning an oven that does not self-cleaning panels must be

done after use, when it is switched off but still warm, not hot, so

that the film of grease produced by the cooking vapours on the

walls is still easy to remove, as well as the drips and splashes

of fat that are not yet hard and dry.

Advertising