Remote start diagnostics – Ready Remote 24927 User Manual
Page 52
49
© 2 0 0 6 D i r e c t e d E l e c t r o n i c s
Remote Start Diagnostics
Remote Start Diagnostics:
Remote Start diagnostics are an important tool that will diag-
nose the status of the remote start system by letting you know
why it remote started, shut down or refused to start as expected.
No Start Diagnostics:
If the system fails to activate Remote Start, Quick stop, Daily
Start or Vacation mode as expected the parking lights will flash
to indicate the reason. Consult the No Start Diagnostic Chart for
the reason.
No Start Diagnostic Chart
Remote Start
Feature
LED
Flashes
Description
Any
0
Indicates a loss of signal from the transmitter to
the system or a loss of power to the main unit.
Daily Start
3
The unit is in the Valet Mode or Battery Voltage is
below 11v when attempting to activate this
feature.
Vacation Mode
3
The unit is in the Valet Mode, Battery Voltage is
below 11v, or the Brake, Hood or Ignition inputs
are active
Remote Start
5
The unit is in the Valet Mode, Battery Voltage is
below 11v, or the Brake or Hood inputs are active
Quickstop
5
The unit is in the Valet Mode, Battery Voltage is
below 11v, or the Brake or Hood inputs are active