CITIZEN U700 - Manual (Page 17)

17
English
1.
Press button M to change the mode to Chronograph.
(“CHR”)
• If the chronograph hands do not point to “0/.00” or “60,” adjust
the reference position. (
→page 39)
2.
Press button B to start measurement.
• To display a split time, press button A. It is displayed for 10
seconds.
3.
Press button B to stop the measurement.
• To restart the measurement, press button B again.
• To reset the measurement time, press button A while the measurement is
stopped.
SPL (Split) indication