Cloud Electronics RH-8c User Manual
Page 9
RH-8 Installation Guide
9
RJ45 connection
If the RH-8 is to be installed on an exercise
machine or similar, we recommend that
a standard data connection point (RJ45
socket) is installed adjacent to the RH-8
location, and that this is wired back to the
CAM-16/CAS-16 using CAT-5 installation
cable. The 3 m cable supplied with the RH-8
can then be used to patch between this
socket and the RH-8.
Ensure that the data point is installed in a
safe location. A flush-mounting floor socket
with a hinged lid or a recessed floorbox
is the ideal solution, as this minimises
the likelihood of damage to the cable or
connector.
If the RH-8 is to be mounted on a flat
surface, there will probably be no necessity
for the intermediate data point, and the installed CAT-5 cable can be run
directly to the RH-8’s location.