Coloronix 6″ RGB Pathway Light - Manual (Page 4)

Summary
Introduction
RGBW Color Changing Pathway Lights are active, top-of-the-line color changing
fixtures. They draw on solid-state elements in order to produce highlights and washes
in architectural spaces.
More specifically, “RGBW” is an acronym for “Red, Green, Blue, and White”. RGBW
LED color mixing luminaires have the potential to produce 4.3 billion colors, and 16.7
million white light tones.
When installed and operated according to this manual, these pathway lights will
operate safely and dependably for their rated lifespan.
These luminaries require a USITT DMX 512 control signal on four consecutive
channels total. The unit includes a DATA OUT output for connection to additional units
or other DMX512 devices. A Color Ray Signal from the internal stand-alone controller
or external controller can be used as well.
The pathway lights are UL 1598 damp location rated for use in indoor or outdoor
environments.
Scope
The purpose of this manual is to properly install and use color-changing pathway lights
at peak performance
.
This manual must be complimented by additional references, consultation from
qualified professional(s), and observance of state and local codes and regulations. This
rule applies to any interior structure, exterior structure, or environment.
Therefore, it is important to:
“please read and comply with all instructions and
warnings in this manual when installing or using this product.”
Who Is This Manual Intended for?
This manual is intended for electrical contractors, electrical engineers, and licensed
electricians.
Additional Supplies
DMX control cable: Belden 9841 or CAT5 RJ45 Cable
DMX512 compatible controller or Coloronix Color Ray Device
DMX controllers
Page 4—Coloronix RGBW Pathway Lighting Manual V1.0