Coloronix 6″ RGB Pathway Light - Manual (Page 6)

Planning for Installation
Unpacking
Survey the unit to make sure the pathway light is intact—not cracked or damaged. Any
damages to the package or its contents are the buyer’s responsibility; please follow
protocol for filing damage claims. Please recycle or appropriately discard any packing
materials.
Preparation
Before Installation, Coloronix suggests:
• Consulting the provided submittal drawings to recognize layouts of luminaries,
power supplies, and wiring layouts.
• Drawing out a layout plan consisting of locations of luminaries and wiring.
• Record DMX addresses on a mapping grid for easy reference and addressing
(where applicable).
• An electrical inspector reviews all wiring plans.
Point to Consider About Data
• AC Power and DATA cables may NOT run in the same conduit due to possible
induced errors.
Quick Step-by-Step Instructions
To successfully install RGBW Pathway lights, the steps are:
1. Setting Color Mode or Setting Stand Alone Color Ray mode
2. Mounting and Alignment of Fixture
3. Installing Power Connections
4. Installing Data Connections
5. Install Pathway Light
6. Ready to Go!
Page 6—Coloronix RGBW Pathway Lighting Manual V1.0