Comtech EF Data DTMX5000 SpectraCast User Manual
Spectracast, Dtmx5000
Advertising
Table of contents
Document Outline
- DTMX5000 Rev 1 Cover
- Customer Support
- Table of Contents
- Chp 1 INTRODUCTION
- Chp 2 INSTALLATION
- Chp 3 CONFIGURING THE GATEWAY USING A TERMINAL
- Chp 4 DTMX5000 MIB FILE
- Overview
- Maintenance Information Base
- Operation Mode Parameters
- Network Interface Configuration Parameters
- DVB Interface Parameters
- Multicast Channel Parameters
- Group Parameters
- Static Users Parameters
- CCU Parameters
- Software Download Parameters
- General Statistics Parameters
- Client Data Flow Statistics Table
- Client Configuration Parameters Table
- Chp 5 TROUBLESHOOTING
- Troubleshooting
- The Gateway Does Not Power Up
- No Communication Between the Gateway and the Local Terminal
- The Gateway Does Not Reply to Ping from the Control and Management Interface
- The Gateway Does Not Reply to Ping from the Transportation Interface
- Gateway Statistics Tables Indicate that there is No Data Flow to Users
- The Gateway Does Not Reply to Telnet/FTP Users
- No Telnet/FTP/SNMP Communication from Outside the LAN
- The Gateway Does Not Reply to SNMP Set or Get Commands
- The Modulator Cannot Synchronize with the Transport Stream (TS) Generated by the Gateway
- The CCU Does Not Communicate with the Gateway
- The Gateway's Output is Connected to a DVB Multiplexer's Input but the DVB Multiplexer Indicates that there is NO TS Input.
- MPE Compatible Receivers Cannot Receive IP Data from the Gateway
- Ongoing Maintenance
- A User Indicates RF Lock but Cannot Receive Data
- The Gateway Statistics indicate a Large Number of Discarded Packets
- The Gateway Does Not Reply to Telnet but Does Reply to SNMP and Terminal Communication
- A User Cannot Receive Multicast Channels or Loses Multicast Packets
- A PC Connected to a LAN Fed by a Satellite Receiver (Static User) Does Not Receive Unicast Transmissions
- The CCU Cannot Register a User in the Gateway
- Troubleshooting
- Appendix A SPECIFICATIONS
- Appendix B CENTRAL CONFIGURATION UNIT
- Overview
- DTMX5000 Service
- Starting a Session
- Processing Information Requests
- Terminating a Session
- Installing the CCU
- Configuring the CCU
- Configuring the CCU to the RADIUS Authentication Server
- Configuring the CCU to the RADIUS Billing Server
- Configuring the CCU to the Proxy Server
- Configuring the CCU to the DTMX5000Gateway
- Operating the CCU
- Client Parameters Sent from the RADIUS
- Appendix C HIGH AVAILABILITY SERVER (HAS-2000)
- Glossary
- Index