Comtech EF Data DTMX5000 SpectraCast - Manual (Page 152)

Central Configuration Unit DTMX5000 IP Gateway
B-16 Rev. 1
B.8 Configuring the CCU to the RADIUS Authentication Server
The RADIUS Authentication Server is responsible for checking a client’s access
rights and informing the CCU if a client is to be allowed access to the system, as
well as the client’s service profile.
The CCU is configured to a specific Authentication Server. The Authentication
Server properties can be obtained from the Authentication Server operator, and
should be entered as described below.
To access a specific Authentication Server, proceed as follows:
1. Either click the System Parameters button,
Or
Select System Parameters from the Configuration menu. The System
parameters window opens.
2. Click the + beside the RADIUS Authentication Server folder. The
RADIUS Authentication Server folder expands to reveal a sub-tree level
containing the names of the Authentication Servers on the system, as
shown in the example below: