Comtech EF Data DTMX5000 SpectraCast - Manual (Page 67)

DTMX5000 IP Gateway Operation
Rev. 1 3–31
3.5.1.4.2 Find a Group
This option enables the user to search for and display the parameters for a specific group.
After selecting this option from the Groups Manipulations menu, type the index number
of the group that will be displayed.
3.5.1.4.3 Add a Group
This option enables the user to create a new group and define the parameters. After
selecting this option from the Groups Manipulations menu, enter an index number
(not necessary a sequential number) for the new group and press <Enter>. The user can
define the new group’s parameters in the displayed window.
Note: If QoS mode Individual is selected, the group’s Min Rate and Max Rate
parameters will be irrelevant since each individual’s QoS parameters will apply.