ConnectGear GR-104 - Manual (Page 14)

14
Chapter 1
Quick Setup
The Quick Setup section is designed to get you using the broadband router as quick as possible.
In the Quick Setup you are required to fill in only the information necessary to access the Internet.
Once you click on the Quick Setup Wizard in the HOME page, you should see the screen below.
Step 1) Time Zone
The Time Zone allows your router to base its time on the settings configured here, this will affect
functions such as Log entries and Firewall settings.
Parameter
Description
Set Time Zone Select the time zone of the country you are currently in.
The router will set its time based on your selection.
Enable Daylight Savings
The router can also take Daylight savings into account. If
you wish to use this function, you must check/tick the
enable box to enable your daylight saving configuration
(below).
Start Daylight Savings Time
Select the period in which you wish to start daylight
Savings Time
End Daylight Savings Time
Select the period in which you wish to end daylight
Savings Time
Click on NEXT to proceed to the next page (step 2) Broadband Type.