ConnectGear GR-104 - Manual (Page 25)

25
2.1.2 Password Settings
You can change the password required to log into the broadband router's system web-based
management. By default, there is no password. So please assign a password to the Administrator
as soon as possible, and store it in a safe place. Passwords can contain 0 to 12 alphanumeric
charac ters, and are case sensitive.
Parameters
Description
Current Password Enter your current password for the remote management
administrator to login to your Broadband router.
Note: By default there is NO password
New Password
Enter your new password
Re-Enter Password Enter your new password again for verification purposes
for Verification
Note: If you forget your password, you’ll have to reset the router
to the factory default (No password) with the reset button (see
router’s back panel)
Idle Time Out
Login Connections (login to web-based management) without
any activity that go beyond this specified period (minutes) will
automatically disconnect the web-based management. Note: Idle
time “0” means no time out, e.g. no time restriction
Click <Apply> at the bottom of the screen to save the above configurations. You can now
configure other advance sections or start using the router (with the advance settings in place)