ConnectGear GR-104 - Manual (Page 27)

27
2.2 WAN
Use the WAN Settings screen if you have already configured the Quick Setup Wizard section and
you would like to change your Internet connection type. The WAN Settings screen allows you to
specify the type of WAN port connect you want to establish with your ISP. In the WAN Settings
screen you can also specify the router to act as a Bridge. The WAN settings offer the following
selections for the router’s WAN port, Dynamic IP, PPPoE, PPTP, Static IP Address, DNS and
Bridge.
Parameters
Description
2.2.1 Dynamic IP address Your ISP will automatically give you an IP address
2.2.2 PPPoE
Your ISP requires PPPoE connection.
2.2.3 PPTP
Your ISP requires you to use a Point-to-Point Tunneling
Protocol (PPTP) connection
.
2.2.4 Static IP address
Your ISP has given you an IP address already
2.2.5 DNS You can specify a DNS server that you wish to use
2.2.6 Bridge
The router can be used as a bridge between LANs
Once you have made a selection, click <More Configuration> at the bottom of the screen and
proceed to the manual’s relevant sub-section