CREATOR SPRO-CON9000 - Manual (Page 21)

CREATOR Corporation China 2010-05 WWW.CREATOR1997.COM
16 User’s Manual for SPRO Network Control Host Series
Picture 3-13
6. Connect to power, open the wireless
connection in the computer, and double click the
position as indicated in picture 3-14 to finish
network connection.
Picture 3-14
3.1.2 Connection
3.2 Wireless One-way Receiver
CR-RFA
CR-RFA wireless (RF) one-way receiver is an
intermedia resolving the communication between
CREATOR wireless (RF) one-way touch screen
and control host, with 433MHz working frequency,
one-way transfer, for receiving the wireless
control signal transmitted from touch screen.
Ports illustration：
1） POWER——Power indicator，it will be on
When connecting to power.
2） ID——ID indicator
When
CR-RFA is connected with the
programming host, the indicator will be on if the
network ID of CR-RFA is the same as the NET ID
of the programming host.
3） SIGNAL——Communication indicator
The indicator will be on when the CR-RFA has
received the control signal from the wireless
touch screen
4） RS-232——Serial port
Reserved for CR-RFA extended function.
The ID CODE in the receiver has to be the
same as the NET ID configured by CR-TRA in
the
programming host. Otherwise, the
receiver cannot communicate with the host.