Daktronics CH-1036V - Manual (Page 5)

Section 1 : Introduction
1.1
How To Use This Manual
This manual explains the installation and maintenance of the Daktronics CH-1036V & CH-
1436V auto racing display systems. For questions regarding the safety, installation, operation or
service of this system, please refer to the telephone numbers listed on the cover page of this
manual.
Important Safeguards:
1. Read and understand these instructions before installing.
2. Do not drop the control console or allow it to get wet.
3. Be sure the display is properly grounded with a ground rod at the display location.
4. Disconnect power to the display when it is not in use.
5. Disconnect power when servicing the display.
6. Do not modify the display structure or attach any panels or coverings to the display
without the written consent of Daktronics, Inc.
The box below illustrates Daktronics drawing numbering system. The drawing number “7087-
P08A-69945” is how Daktronics identifies individual drawings. This number is located in the
lower-right corner of the drawing. This manual refers to drawings by listing the last set of digits
and the letter preceding them. In the example below, the drawing would be referred to as
Drawing A-69945. Referenced drawings are inserted at the end of the first section which
references them.
1.2 Display
Overview
Reference Drawing: Models CH-1036V and CH-1436V ................ Drawing A-78611
Refer to Drawing A-78611 for an illustration of the Daktronics CH-1036V and CH-1436V
displays. These displays along with the Daktronics CHTS-300 timing console will show the car
positions, time or lap number and the track status.
Introduction 1-1