Section 4: maintenance and troubleshooting, 1 maintenance, 2 troubleshooting – Daktronics Sportsound Rack SSR-200 Operation Manual User Manual

Page 27: Section 4, Maintenance and troubleshooting, Maintenance, Troubleshooting

Advertising
background image

Maintenance & Troubleshooting

21

Section 4:

Maintenance and Troubleshooting

4.1 Maintenance

Unplug rack (and fiber box, if included) from power during periods of non-use.

Store equipment in a clean dry place free from moisture, debris, and extreme temperatures.

Keep announcers rack and equipment covered from dust and debris when not in use.

Clean equipment annually or as needed using electronic equipment duster and a dry cloth.

4.2 Troubleshooting

This section lists potential problems with the system, indicates possible causes, and suggests
corrective action. This list does not include every possible problem, but it does represent
some of the more common situations that may occur. If individual components fail to work,
refer to troubleshooting sections in the manufacturers’ manuals. If the problem persists,
please contact Daktronics for assistance.

Symptom/Condition

Possible Cause

Potential Solution

No power lights illuminated on rack

equipment

Rack power strip switch is in

the OFF position

Flip the rack power strip

switch to the ON position

Rack is plugged into dead

wall receptacle

Verify the rack is plugged

into live wall receptacle

No audio exiting the rack

SOUND SYSTEM switch is in

the OFF position

Flip switch to the ON

position

No audio present at mixer

Verify audio source is

outputting signal to mixer

and gain knobs are set to an

appropriate level (mixer

signal indicator lights should

be illuminated)

Announcer’s interface microphone
signal does not appear at mixer

Announcer interface does not

have power

Verify the interface is

plugged into live wall outlet

Announcer

’s interface is not

plugged into appropriate

inputs on the back of the

portable

announcer’s rack

Plug announcer

’s interface

into AUX 1 and MIC 1 on the

back of the portable
announcer’s rack

Improper mixer slider settings

for MIC 1

Adjust mixer slider settings

The announcer’s interface
“press to talk” button is not
being pressed

Hold

the “MOMENTARY”

button while speaking into

the microphone

Advertising
This manual is related to the following products: