Dataprobe iPIO-8 Operation Manual - Manual (Page 13)

iPIO-8
Page 13
Specifications
Physical 5.25"W x 5.5"D x 1.75"H (13.3 x 14.0 x 4.5 cm)
Environmental Temperature 0 - 70 Deg C Operating
Humidity 90 Pct Non Condensing
Power Wall Mounted Power Supply, included
105 - 240 VAC 50/60Hz or +5VDC direct.
Connections 2 Terminals per Input. (common ground)
Three Terminal per Relay Output (Form C)
LED Indictors 8 x Input.
8 x Output.
Network Link (Link) and Activity (Act).
Remote Unit Link Status (Rmt).
Power (Pwr)
Switch Reset. Hardware Reset
Inputs 8 Digital Inputs
Dry relay/switch closures or
+/-3VDC to +/-30 VDC
Grounds common
Control Relay
Current Maximums 0.5A @ 120VAC or 1A @ 24VDC
Switching Power 60VA Max 50uW Min
Switching Voltage 120VAC or 60VDC Max 1VDC Min
Switching Current 1A Max 1mA Min
Resistance 100 milliohms (initial value)
Operations 5 Million, mechanical. 100K at maximum load
Network HTTP Web Server
SSL Secure Sockets Layer
DHCP Assigned or Static IP Address
Email to SMTP Server
SNMP V2 Manageable. MIB Supplied
Inter Device Communications via DxP Protocol supplied.
128 bit AES Encryption optional
Selectable Port assignments for Web, SSL and DxP Protocol.