Dataprobe iPIO-8 Operation Manual User Manual
Page 8
iPIO-8
Page 8
Destination 1 & 2. Set up to two email addresses to receive notifications.
Send Email on Change. Select which type of events will generate email notifications.
Input. Email on any input change
Relay. Email on any relay change
Communication. Email on any change in communication status to the remotes.
Configuration. Email on any configuration change.
SNMP Setup
iPIO-8 is SNMPv2 manageable. Set the
SNMP manager and trap information on this
screen.
SNMP Managers 1-4. Set up to four SNMP
manager IP addresses. Each manager
defined here will receive traps.
Read & Write Community. Set the SNMP
Read Community and Write Community
strings here.
Send Trap on Change. Set which events
will generate SNMP Traps.
Input. Email on any input change
Relay. Email on any relay change
Communication. Email on any change in communication status to the remotes.
Configuration. Email on any configuration change.
To use the SNMP, download the iPIO MIB at
Input Setup
Each of the eight inputs is represented by a
tab with its name. Click on the tab to access
the setup parameters for each input.
Each input has a user definable name (20
characters max.).
Both the Open and Closed conditions have a
user definable Name (20 characters max.)
and a Qualifying time in (0-99) seconds to
qualify an reportable event.
The user may also select colors for the
background and text. To select the colors,
click on the color boxes below the Open and Closed names. Click Save when done, before moving to
the next tab.