Dataprobe iPIO-8 Operation Manual - Manual (Page 5)

iPIO-8
Page 5
WEB Page Access
The web pages provide status information on the
inputs and outputs of the iPIO-8, as well as provide
configuration for the unit. Open a browser to the
default or current IP address of the unit. Enter the
default username and password:
Factory Defaults:
IP Address 192.168.1.254
User Credentials
User Type Default Username / Password Access
Administrator admin / admin View, Control and Setup
General User user / user View and Control
Status and Control
The Status and Control web page provides
real time status of the inputs, outputs and
remote iPIO-8 unit connections.
The top of the page indicates the iPIO-8
device the user is connected to. This
location ID is settable.
Each input, output and remote device is
defined by a user selectable name. Inputs
and outputs can also be assigned names
for Open and Closed statuses, as well as
background and text colors for each. All
configurations are accomplished via the
Setup button at the left of the screen.
If the iPIO-8 is programmed to
communicate with additional units, each
remote unit will be displayed at the bottom
of the page. Each remote site displays red or green, indicating connection status.
Operation
To operate any of the relays, click on the Change button associated with that relay.
To view the latest status, click on the Refresh button.
To access the configuration click the Setup button (Administrator Only).
To logout, click the Logout button.
iPIO-8 Login Page