Daktronics Venus 1500 Version 4 - Manual (Page 29)

Display Configuration
19
Automatically Detect a Display
If no displays were detected during the Discovery phase, click My display is not in the list and click I
want to automatically detect a display.
Select a Communication Type.
 Serial Communication: Select a COM port and click Continue.
 Ethernet Communication: Enter a DNS name or IP address and specify a port number. Click
Continue.
Note: If the display is password-protected, enter the password on the Authentication Page. Click
Continue.
Give the display an easy to identify name when the Display Found prompt opens. This prompt also
provides a brief description of the display. Click Continue.