DFI CD905-B series - Manual (Page 42)

www.dfi .com Chapter 4 BIOS Setup
42
Chapter 4
TPT Devices
Azalia Controller.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Azalia Controller
Select USB Mode
UHCI #1 (ports 0 and 1)
UHCI #2 (ports 2 and 3)
UHCI #3 (ports 4 and 5)
UHCI #4 (ports 6 and 7)
USB 2.0 (EHCI) support
[HD Audio]
[By controllers]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
Chipset
 Select Screen
 Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Select USB Mode
By controllers or ports.
UHCI #1~4
Control the USB UHCI (USB1.1) fuctions. Disable from highest to lowest controller.
USB 2.0 (EHCI)
Enable or disable USB 2.0 (EHCI) support.
Setup Prompt Timeout
Selects the number of seconds to wait for the setup activation key. 65535(0xFFFF)
denotes indefinite waiting.
Bootup NumLock State
This allows you to determine the default state of the numeric keypad. By default, the
system boots up with NumLock on wherein the function of the numeric keypad is the
number keys. When set to Off, the function of the numeric keypad is the arrow keys.
Quiet Boot
Enables or disables the quiet boot function.
Option ROM Messages
Set display mode for option ROM.
Interrupt 19 Capture
When enabled, it allows the optional ROM to trap Int 19.
Boot
Number of seconds to
wait for setup activation
key.
65535(0xFFFF) means
indefi nite waiting.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Boot Confi guration
Setup Prompt Timeout
Bootup NumLock State
Quiet Boot
CSM16 Module Version
Option ROM Message
Interrupt 19 Capture
Boot Option Priorities
Boot Option #1
Boot Option #2
Hard Driver BBS Priorities
CD/ DVD ROM Driver BBS Priorities
Save & Exit Chipset Advanced Security Main Boot
 Select Screen
 Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
1
[On]
[Disabled]
07.65
[Force BIOS]
[Disabled]
[SATA SM: PHILIP....]
[SATA PM: WDC ED32...]