DFI CD905-B2600 - Manual (Page 29)

www.dfi .com Chapter 3 Hardware Installation
29
Chapter 3
Standby Power LED
Standby
Power LED
This LED will light when the system is in the standby mode.
Cooling Option
Heat Sink with Cooling Fan
• “1”, “2” and “3” denote the locations of the thermal pads designed to
contact the corresponding components that are on CD905-B.
Top View of the Heat Sink
Bottom View of the Heat Sink
1
2
3
Important:
Remove the plastic covering from the thermal pads prior to mounting the heat sink
onto CD905-B.