Chapter 4 – DFI CD905-B2600 User Manual

Page 36

Advertising
background image

www.dfi .com

Chapter 4 BIOS Setup

36

Chapter 4

CPU Configuration

This section is used to configure the CPU. It will also display the detected CPU

information.

Enabled for Windows XP
and Linux (OS optimized
for Hyper-Threading
Technology) and Disabled
for other OS (OS not
optimized for
Hyper-Threading
Technology).

Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.

Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.

CPU Confi guration

Processor Item
EMT64
Processor Speed
System Bus Speed
Ratio Status
Actual Ratio
Processor Stepping
Microcode Revision
L1 Cache RAM
L2 Cache RAM
Processor Core
Hyper-Threading

Hyper-threading

Executive Disable Bit
Limit CUPID Maximum

Advanced

Hyper-threading

Enable this field for Windows XP and Linux which are optimized for Hyper-Threading

technology. Select disabled for other OSes not optimized for Hyper-Threading tech-

nology. When disabled, only one thread per enabled core is enabled.

Executive Disable Bit

XD can prevent certain classes of malicious buffer overflow attacks when combined

with a supporting OS (Windows server 2003 SP1, Windows XP SP2, SuSE Lunix 9.2

RedHat Enterprise 3 Update 3.)

Limit CUPID Maximum

The CPUID instruction of some newer CPUs will return a value greater than 3.

The default is Disabled because this problem does not exist in the Windows series

operating systems. If you are using an operating system other than Windows, this

problem may occur. To avoid this problem, enable this field to limit the return value

to 3 or less than 3

.

Intel(R) Atom(TM) CPU
Supported
1600 MHz
400 MHz
16
16
30661
262
2x56 k
2x512 k
Dual
Supported

[Enabled]

[Enabled]
[Disabled]



Select Screen



Select Item

Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous

Values

F3: Optimized

Defaults

F4: Save & Exit
ESC: Exit

IDE Configuration

This section is used to configure IDE functions.

SATA Ports (0-3) de-
vices names if present
and enabled.

Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.

Version 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.

SATA Port 0
SATA Port1

SATA Controller(s)

Confi gure SATA as

Advanced

Configure SATA as

This field is used to select a configuration for SATA controller.

WDC WD3200AAKS (320.0

PHILIPS SPD251 ATAPI

[Enabled]

[IDE]



Select Screen



Select Item

Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous

Values

F3: Optimized

Defaults

F4: Save & Exit
ESC: Exit

Advertising