DFI NP900-B16C - Manual (Page 50)

50
3
BIOS Setup
On-Chip Frame Buffer Size
This field is used to select the onboard VGA’s frame buffer size that
is shared from the system memory.
DVMT Mode
The options are DVMT, Fixed and Both.
DVMT/Fixed Memory Size
This field is used to select the graphics memory size used by DVMT/
Fixed mode.
Boot Display
This field is used to select the type of display to use when the
system boots.
CRT Select this option if you want the system to boot
the CRT display.
LFP Select this option if you want the system to boot
the LCD flat panel display.
CRT+LFP Select this option if you want the system to boot
both the CRT and LCD flat panel display.
EFP Select this option if you want the system to boot
the EFP display.
CRT+EFP Select this option if you want the system to boot
both the CRT and EFP display.
Panel Scaling
This options are Auto, On and Off.
Panel Number
This field is used to select the type of panel that you are using.