DFI NP900-B16C - Manual (Page 54)

54
3
BIOS Setup
The settings on the screen are for reference only. Your version may not be
identical to this one.
Phoenix - AwardBIOS CMOS Setup Utility
Onboard Device
Item Help
Menu Level XX
↑↓→← : Move Enter: Select F1: General Help +/-/PU/PD: Value F10: Save ESC: Exit
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Onboard LAN Control
Onboard PXE ROM Control
Azalia/AC97 Audio Select
X USB Device Setting
Enabled
Disabled
Auto
Press Enter
Onboard Device
Move the cursor to this field and press <Enter>. The following
screen will appear.
Onboard LAN Control
This field is used to enable or disable the onboard LAN.
Onboard PXE ROM Control
Enable this field if you wish to use the boot ROM (instead of a disk
drive) to boot-up the system and access the local area network
directly. If you wish to change the boot ROM’s settings, type the
<Shift> and <F10> keys simultaneously when prompted during
boot-up. Take note: you will be able to access the boot ROM’s
program (by typing <Shift> + <F10>) only when this field is
enabled.
Azalia/AC97 Audio Select
Auto Automatically detects the audio.
Azalia Enables the Azalia audio.
AC97 Audio only Enables the AC97 audio.
All Disabled
Disables all audio. Disable the onboard audio
when using an audio PCI card.