DFI COM630-B - Manual (Page 14)

14
2
Hardware Installation
Panel Power Select
JP5
JP3 is used to select the power supplied to the LCD panel.
Important:
Before powering-on the system, make sure JP3’s setting matches the
LCD panel’s specification. Selecting the incorrect voltage will seriously
damage the LCD panel.
1-2 On: 12V 3-4 On: 5V 5-6 On:
3V (default)
JP3
1 5
2 4 6
3 1 5 3 1 5 3
2 4 6 2 4 6