Digi-Star EZ3400VL - Manual (Page 10)

Operation
D3936-GB Rev C EZ3400VL User' s manual 10
PROGRAMMING RECIPES
The ingredients in a recipe can be entered in three different ways:
1. Amount per animal (standard setting)
Enter the amount of ingredients in weight per animal. For example, 9 kg silage and 8 kg corn per
animal. Depending on the number of animals, the weighing indicator will calculate the total amount
of the ingredients automatically: For example, with 100 animals this will be 900 kg silage and 800
kg corn.
2. Percentage (%) per ingredient
Enter the amount of ingredient as a percentage (%). For example, 55% silage and 45% corn. The
weighing indicator will calculate the amount per ingredient automatically based on the total weight:
For example, with a total weight of 1000Kg this will be 550 kg silage and 450 kg corn. Attention;
the total must be 100%.
3. Amount per ingredient
Enter the required total amount per ingredient. For example, 2500 kg silage and 2000 kg corn.
Changing the programming method
[E-mthd]
1. Enter 441 and press .
2. Press repeatedly to select the required
programming method for the recipes.
1 = Amount per animal
2 = Percentage (%) per ingredient
3 = Amount per ingredient
3. Press to confirm the selected
programming method.
Changing ingredient or pen name
The standard ingredient and pen names can be changed as required:
1. Repeatedly press , until RENAME is
displayed.
2. Press and hold for 3 seconds.
3. Press or to go to the ingredient/pen
you want to change.
4. Press to edit the name. The display
briefly shows EDIT and a flashing cursor will
display.
5. Press repeatedly to delete the
ingredient/pen.
1
1
3
E mthd
ingrnm
1
2/4
2
3 5