Digi-Star EZ3400VL - Manual (Page 18)

Advanced functions
D3936-GB Rev C EZ3400VL User' s manual 18
ADVANCED FUNCTIONS
Holding the displayed amount
In Hold mode the displayed weight remains on the display while moving the feed mixer.
1. Press to hold the displayed weight.
2. Press to return to the normal mode.
If by mistake an ingredient is loaded while the
weighing indicator is still in Hold mode you can
press to overrule the hold mode and show
the added weight..
Backlight intensity
1. Press until dimmer shows on the display.
2. Press to reduce the backlight intensity
by 60%.
Press again to return to the full
intensity.
Preset (presetting)
If you want to manually load or unload a specific amount you can enter a “preset” weight in the
weighing indicator. The weighing indicator will count down from this amount to zero and will give a
loud alarm signal as soon as zero is reached.
1. Enter the required amount that you want to
load or unload.
2. Press . The weighing indicator will
round off the amount.
As soon as a preset value has been entered the
amount to be loaded or dosed out will be
displayed in one of the following three weighing
settings:
• Gross weighing mode
•
Load/Dosing out weighing mode
•
Net weighing mode
1/2
HOLD
3000
2
`1
dimmer
1
2