Digi-Star EZ3400VL - Manual (Page 13)

Operation
D3936-GB Rev C EZ3400VL User' s manual 13
Change amount or number of animals
a recipe
1. Enter the “recipe programming” mode. See
“Enter programming mode on page 12”
2. The first ingredient name is displayed
followed by AMOUNT .
3. Use or to go to the ingredient/pen
you want to change.
4. Change the amount/number of animals.
5. Press to store the new
amount/number of animals.
Repeat steps 3-5 for each ingredient or pen you
want to change.
6. When ready repeatedly press until you
see done
7. Press one more time to store the
changes and leave the recipe
Insert ingredient or pen in a recipe
1. Enter the “recipe programming” mode. See
“Enter programming mode on page 12”
2. Use or to go to the location
where you want to insert an ingredient/pen.
3. Press and hold to insert a new
ingredient/pen.
Note: This will insert a new ingredient before
the current ingredient on the screen.
4. Press or to scroll through the
available ingredients/pens.
5. Press to select the required
ingredient/pen.
6. Enter the required amount/number of
animals.
7. Press to store amount.
3
insert
2
5
amount
3
4
hay
4
5/7
6
done
6/7