Digi-Star EZ3400VL - Manual (Page 14)

Operation
D3936-GB Rev C EZ3400VL User' s manual 14
Deleting recipe
1. Enter the “recipe programming” mode. See
“Enter programming mode on page 12”
2. Repeatedly press or to go to the
recipe you want to delete.
3. Press and hold . The display shows:
press zero to erase recipe or net/gross to
exit .
4. Press again to erase the recipe.
5. Press to exit.
Delete ingredient or pen from a recipe
8. When ready repeatedly press until you
see done
9. Press one more time to store the
changes and leave the recipe
Note: If you want to insert an ingredient or
pen at the end of the recipe go through the
recipe until you see
done and then press .
1. Enter the “recipe programming” mode. See
“Enter programming mode on page 12”
2. Use or to go to the ingredient/
pen you want to delete from the recipe.
3. Press and hold to erase the
ingredient/pen. Display shows: LEFT or zero
to erase .
4. Press again to erase the displayed
ingredient/pen.
5. When ready repeatedly press until you
see done .
6. Press one more time to store the
changes and leave the recipe.
PRGREC
2
ZERO TO
3/4
2
3
4
5
5/6
amount
8/9