Digi-Star GT400 - Manual (Page 20)

Short Form Calibration
16 GT400 User’s Manual D3831 Rev B
Enter A New Setup And
Calibration Number
1. Press and hold and
for 3 seconds to enter short form
calibration.
2. The display will flash “
SETUP
” and
then display the 6-digit setup
number with the right digit flashing.
3. Press several times to
increment digit to it proper value.
4. Press to advance digit left.
Repeat steps 3 and 4 for each digit as
required.
5. Press to enter new setup
number and display calibration
number.
Repeat steps 3 and 4 to modify the
calibration number.
6. Press to enter new calibration
number and display will go back to
normal.
7. Verify the accuracy of scale.
1 1 3 4
5 6