Digi-Star John Deere 1990 CCS Dual Rank 30/36/40/44 - Manual (Page 6)

Scale Bracket and Load Cell Mounting Installation
4 John Deere Planter Scale D3866-US-Rev A
12. The load cell is held to the front top bracket with 3/4 x by 2 in. bolts. The 2 in. bolts need to have thread
lock applied to the threads.
THIS BOLT CAN NOT BE COMPLETELY TIGHTENED DOWN, LEAVE 1/16 in.
BETWEEN BOTTOM OF BOLT HEAD AND TOP BRACKET!
13. Install brackets on the other front leg. When all brackets are installed tighten all of the frame bolts, top
brackets and load cell bolts.
14. Loosen the left and right hand rear ladder u-bolt so there is 1/8” minimum clearance. The u-bolt must not
contact the ladder tubing.