Digi-Star Cab Control 400 - Manual (Page 6)

Cab Control 400
4
The EZ indicator has a factory-installed and configured radio
that is assigned a unique scale number
. Two
indicators cannot operate using the same scale number.
(Select )
NOTE: For best performance on systems with six or less
indicators, use scales numbered 1 - 6.
Change Scale Number on Indicator
NOTE: Perform this process on the indicator front panel (Do
not use Cab Control 400).
1. Enter the Long Form Setup by holding [Net/Grs] and
[On] for three seconds.
2. Press [Net/Grs] or [Select] to advance to .
3. Press [On] to advance to
4. Press [Net/Grs] or [Select] to set to .
5. Press [On] to save setting and advance to
.
6. Press [Net/Grs] or [Select] to set to desired scale.
7. Press [On] to save setting and advance to end of
menu.