Cab control 400 – Digi-Star Cab Control 400 User Manual
Page 8
Cab Control 400
6
Example below illustrates how to set up a system with two
scales. ! ! is set to , "
* *
is set to % minutes and
Scale #1 and Scale #2 are enabled:
! !
* *
%
(
(
(
+
(
%
( ,
+
(
'
(
(
&
( -
(
(
.
( /
(
NOTE: On systems with six or less scales, use scales
numbered 1 through 6.
To run the self-test on the Cab Control 400, follow
instructions under “Setup Cab Control 400” steps 1 through
7 on page 5 and press [Net/Grs] in step 8.
!
If the power supply voltage drops below the (10.5 Volts), the
message
0 "
1
"
0 "
1
"
0 "
1
"
0 "
1
"
#
2 1
$ $
#
2 1
$ $
#
2 1
$ $
#
2 1
$ $
and 3 4
3 4
3 4
3 4
will
periodically show on the display to alert the operator of the
low battery condition.
NOTE: If
"
is displayed, the indicator power (not the
Cab Control 400 power) is below 10.5 volts.
Warning!
Disconnect the Cab Control 400 power cord
before jump-starting or fast-charging the
battery.