Echo Bear Cat SC2206 - Manual (Page 11)

2.75 INCH CHIPPER/SHREDDER 7
ENGLI
sH
section
understanding how your machine works will help you
achieve the best results when using your chipper/shred-
der. The following descriptions define the features and
controls of your machine.
3 FEATuREs & coNTRoLs
sHREddER cHuTE
Feed sticks and branches no larger than ¾ inch in diameter
into the shredder chute.
cHIppER cHuTE
Feed branches no larger than 2.75 inches in diameter into
the chipper chute.
REcoIL sTARTER
used to start engine. grasp handle and pull out to start.
refer to engine manual for further engine operating
instructions.
TRANspoRT HANdLE
used to move machine. grasp handle, tip machine back
onto its wheels and push or pull machine to desired location.
never transport or move machine with engine running.
SHREDDER
CHUTE
CHIPPER
CHUTE
DISCHARGE CHUTE
TRANSPORT
HANDLE
MANUAL HOLDER
RECOIL STARTER
GAS TANK
CAP
OIL DIPSTICK
dIscHARGE cHuTE
Chipped and shredded materials are discharged onto the
ground through the discharge chute.
oIL dIpsTIcK
Check the oil level before each use by removing the dipstick.
GAs TANK cAp
Check the gas level before each use.
mANuAL HoLdER
Conveniently stores your owner's Manual.