ENVIROMAC 103 Snorkvac - Manual (Page 14)

Troubleshooting.
Symptoms Possible reasons Solution
The arm will not stay
where it is placed
The joints require adjustment Adjust the joints (item VIII)
Stronger resistance
during rotation of the
arm
Lack of grease in the rotating socket Grease the rotating socket
Decrease in air volume
A/ Hose not properly connected to
Arm tubes.
B/ The flexible hose is damaged.
C/ The Damper is closed A/Reconnect Hose.
B/ Replace Damaged Hoses.
C/ Open Arm Damper
Safety guidelines.
For the safe operation of the ENVIROFLEX® SNORKVAC™ self-supporting Fume Arms:
• DO NOT rotate the arm beyond the noticeable "resistance" (4”, 6” and 8” versions).
• DO NOT bend it beyond vertical axis of the rotating socket.
ACCESSORIES
Light kit
The light kit includes an LED lamp with hood switch, wires and mounting brackets for the hood.
Hoods
• You can get optional extension hoods.
• φ14” for 6” arm
• φ20” for 8” arm
Mounting brackets
Wall brackets see Drawing 2.
Ceiling Brackets
Fans
A variety of fans are available with various voltages, HP and CFM requirements
Pivoting booms
Numerous lengths and styles of boom are also available.