General information, Purpose, Options – ENVIROMAC 103 Snorkvac User Manual
Page 4
Date: October 24, 2013
This manual is designed to inform the user about the proper
assembly and use of the device. The user is advised to get fully
acquainted with the contents of the manual before installation of
the device and to handle the device according to the manual.
General information.
This manual contains basic technical data of the self-supporting suction arms type ENVIROFLEX®
SNORKVAC™ and necessary information about installation, start and use of the devices. Before
assembly and use of the device the owner and operator should read this manual carefully in order to
fully understand the construction of the device, the principles of its operation, as well as its service and
safety features. This will permit safe, efficient operation and assembly of the device. The manufacturer
reserves the right to make design and technological changes, which may improve the device. The
manufacturer doesn’t take any responsibility if the device isn’t used according to manual.
Purpose.
ENVIROFLEX® SNORKVAC™ self-supporting Fume Arms are designed to easily position near the
source of fume generation and to easily provide for the extraction of dust and gas emissions in the
workplace.
The arms ensure the most efficient means of protecting the worker from the impurities by removing
them before they enter the operators breathing zone. Proper Use of the self-locking joints and the
flexible hoses ensures very easy extension of the hood close to the source of the contaminant.
Closing of the manual damper allows the operator to divert the air to other units on the same system,
which increases efficiency of the complete ventilation ducting.
Options
The ENVIROFLEX® SNORKVAC™ Self-supporting Fume Arms can be connected with:
- pivoting extension booms 3ft(.9M), 7ft.(2M), 10ft.(3M), 14ft.(4M), 161/2ft.(5M) and 19 1/2ft.(6M) in
length giving you a maximum reach of 33 1/2ft.(10M)
- different filtering devices or with fans