ETA Andare Animal - Manual (Page 24)

Cleaning theTURBO nozzle
If hair or threads are twisted around the mounting of the drive shaft and if they cannot be
removed in the way described above, the impurities have to be removed by dismantling the
nozzles. In the lower part remove the cover. Now you can clean the nozzle using
a suitable tool (eg tweezers). Insert the lid to the nozzle in the opposite direction (you will
hear a snapping sound).
VI. TROUBLESHOOTING
Problem Cause Solution
Motor won‘t start Power supply not connected Check the cord, plug and the socket
button is not switched on Push button
The container
cannot be put
into the vacuum
cleaner -
activated safety
lock
The parts of the filtration
system not inserted properly in
the container
Check/adapt the position of the
separator/foam micro-filter and the
HEPA filter in the container
Suction output is
not sufficient
Regulation in MIN position Set regulation to MAX.
Open suction Close the hole in the hose handle
Dust container full mpty the container
Clogged micro-filters Clean or replace the micro-filters
Nozzle, suction hose or tube is
clogged
Remove blocking objects
The cable
cannot be
wound in the
entire length
Twisted cable Straighten the cable
Take out about 50 cm of the cable
and push again button
VII. ENVIRONMENTAL PROTECTION
If the dimensions allow, there are labels of materials used for production of packing,
components and accessories as well as their recycling on all parts. The symbols specified
on the product or in the accompanying documentation mean that the used electrical
or electronic products must not be disposed of together with municipal waste. For proper
disposal of the product, hand it over at special collection places where it will be taken
over free of charge. Suitable disposal of the product can help to maintain valuable natural
resources and to prevent possible negative impacts on the environment and human health,
which could be the possible consequences of improper waste disposal. Ask for more
details at the local authorities or at a nearest collection site. Fines can be imposed for
improper disposal of this type of waste in agreement with the national regulations. If the
appliance is to be put out of operation, we recommend its cutoff after disconnecting it from
power supply and in this way it will not be possible to use the appliance again.
GB
24 / 39